OpenWRT

• TP-Link TL-WR741ND+ QoS Wireless-N Router, $138, seems supported

• Cisco Wireless Products
  • Cisco 1250 Series AP
  • Cisco 1130AG Series support
  • Cisco 4400 Series WLAN Controller
  • Cisco Wireless Control System software
• Aruba
• Ruckus Enterprise WLAN
• H3C Wireless Products

• (not work) after boot up, try DHCP, then assign 10.0.0.1 to itself in first 5 mins, then retry DHCP only
• enter privileged EXEC mode with command: enable
• Default login and password is: Cisco
• Basic command to set ip

  enable
  configure terminal
  interface bvi1
  ip address [ip] [mask]
  

• Aironet extension required for these features:
  • Load Balancing
  • Message Integrity Check (MIC)
  • Temporal Key Integrity Check (TKIP)
  • Repeater Mode
  • World Mode
• 802.11a & 802.11b/g supported
• Upto 16 SSID can be created
• VLAN is required if need to use multiple encryption types,
  else encryption type is map to interface only

• Reset to factory default: press and hold MODE button before reboot, then hold it for 2-3 seconds until Ethernet LED turn amber

• POD – Packet of Disconnect
• CAC – Call Admission Control